Some Steps To Make DIY Window Replacement Easier

Many homeowners try to replace their old windows themselves due to higher cost of hiring a professional for this purpose. The process of DIY window replacement can be easier by following the steps discussed here under.

 

Buy a window of right type: You can find ready-to-use replacement windows on a number of online as well as offline stores. It should not have fins to nail in so that you can just fit them in the frame existing in the wall opening.

 

Measure the space correctly: In order to get the most appropriate repair window in Oklahoma City you should measure the space in your wall accurately. You should use a measuring tape to measure the width and height inside the existing frame so that you can easily fit the window in it.

 

Remove window stops and trim carefully: You should remove the old window carefully so that the materials installed around do not get damage. You should use proper tools and equipment for this purpose.

 

Pay attention to cords, pulleys and sash weights: Any chain or cord with weights on the sash should be cut, removed and discarded carefully after removing the sash.  If there is any rope on the sash then you should cut it down but you should not remove stops from outside the window frame. Now you should sand the wooden parts of the frame and use wood putty to patch up the holes in it. You should also use the clumps of fiberglass to fill larger holes on the frame.

 

First install window roughly: Initially you should set the replacement window in the opening in the wall to get an idea for the adjustments required in fitting it properly. You should mark the adjustments required in the window.

 

Adjust shims properly:  Shims are necessary to provide support to your new window. You may not be able to ft the new window properly without adjusting its shims as they help in making small adjustments while fitting the window.

 

Remove packing clips from the replacement window: Clips made of hard plastic are fixed on the sash of the new replacement windows to avoid the movement of sash and maintain the shape of the window during transit. So you should remove them properly before installing the window.

 

Fit the window in the opening:  First use a sealant bead of 3/8” to caulk the sill before putting the window into the wall opening. Now check all the corners of the window for square by  using your square. You can also square out the window by placing the shims in their marked position. Now use the mounting screws provided with the window to screw them on the bottom and top of each jamb. Now close the gap between the window frame and the replacement window by moving the header up. Now fix the header in its place by using the screws provided to you.

 

Test the operation of the window: Both the sashes should slide smoothly. You should adjust the screw to adjust the operation of the window if the sashes are tight.

 

Thus the process of DIY window replacement in Oklahoma City can be completed easily by following the tips provided in this write-up.

Contact US:

Central Glass & Mirror
Address:232 W Britton Rd,Oklahoma City, OK
Phone: 405-840-1636