How To Remove H2 From Gas

Are you keen on removing unwanted hydrogen or h2 from the gas sources? Then you may find this article interesting and informative. There is a growing need to remove unwanted hydrogen from gas or even from an unwanted space where it is not required. There are many end-users where there could be a need for removing hydrogen from gas. For example, you could have customers where there are battery systems that have been installed for long term operations. It could be under the sea or even in space. In many batteries, there could be a significant release of hydrogen. This may be caused because of some corrosion reaction. The hydrogen has to be removed because it could interfere with the electronic systems. Some customers also feel that the levels of hydrogen could go very high increasing the risk of explosion. There have been instances where batteries were being used to monitor deep oil well. The hydrogen that was being released was causing quite a bit of disturbance with the fiber optic communications.

How Can Hydrogen Be Removed

There are many ways by which the problem can be solved and we will look at a few of them. The most common and perhaps the simplest solution would be to go in for an organic hydrogen getter. It has a concentration of labile unsaturated hydrocarbon. These getters are extremely effective in the air and even in inert gaseous situations. They work well at temperatures of around -20 degrees C to 150 degrees C. When the getter is used in an inert gaseous environment, the organic concerned is hydrogenated. Further, there also is a finite amount of removal of hydrogen per gram of sober. When it is used in the air, this catalyst also promotes a highly effective water forming reaction. Hence there is a generous removal of hydrogen sulfide. Different concentrations of getters are available. These could be used for varying temperatures, either high or low. There are improved technologies that enable the users to remove hydrogen even at temperatures of around 300 degrees C. These could come in handy for hydrogen removal in wells that are located deep down.

The Role of Inorganic Hydrogen Remover

When you want to remove hydrogen at a higher temperature of around 100 degrees C and more, it would be a good idea to use inorganic hydrogen removers. There are many such options including platinum ceria catalyst. These are often considered to be the best option for the removal of hydrogen from air. They also work extremely well in polluted air. They are often considered to be the best choice for storage areas where there is a risk of radioactive waste. The good thing about a platinum catalyst is that it works long term even at a varying range of temperatures. It is efficient even in wildly fluctuating temperatures ranging from zero-degree centigrade to 600-degree centigrade. It also works without air and efficiently converts hydrogen irreversible and converts it into water. It is best suited whenever there is a need for a finite amount of hydrogen removal when measured per gram. They also work well in a sealed environment.


Contact US:

Chemical Products Industries, Inc.
Address: 7649 SW 34th St, Oklahoma City, OK
Phone: (800) 624-4356